More than 20 000m² of TenCate ROCK® PEC55-55 stabilized the platform and saved 3000 m3 of subbase material. Additionally, this avoid an equivalent traffic of 300 trucks, leading to decrease significantly the environmental impact.
The new A1-M1 Link Road crosses soft soil areas. To ensure the stability of the embankment, a basal reinforcement using a geosynthetic had to be realized.
The embankment supporting the new A1-M1 Link Road is retained by a L shape concrete wall. To limit the earth pressure coming from the fill onto the concrete wall, an adequate drainage system was installed.
To protect the "Dohlennest" reservoir from the effects of avalanche flows it was decided to construct two protection barriers, one along the Southwest side of the reservoir and the other along the Southern side.
To withstand high traffic loads, Federal German roads require good quality foundations. This requirement was achieved on a section of the B480n Bad Wünnenberg Bypass by installing Geolon® PET800 geotextile reinforcement.
To ensure effective protection of Mittenwald, two protection barriers were constructed. One avalanche protection barrier was located at the foot of the avalanche fall line. Another avalanche barrier was connected to the first one.
Rehabilitation Section of B3 Danube federal road with PGM-G
Successful test installation of TenCate Polyfelt® PGM-B in Nijverdal
Very dry and hot climate leads to evaporation of the significant volumes of water.
Western and Central regions of the country have almost no rivers while fresh water is absolutely necessary for the production of grain, cotton, rice and sugar beets, as well as for drinking and communal services purposes.
